TA 140 Temperature and relative humidity wireless datalogger with display Dostmann 5000-0140 30.3039.IT

New product

Brand: Dostmann

For the control of temperature and humidity with indication of dew point, max./ min. function, average values, alarm at freely adjustable temperature and humidity values (upper/​lower limit), data logger with a capacity up to 50.000 measured values, recallable via display or PC-USB interface. Connection of up to 8 wireless outdoor transmitters.

Swiss Precison Farmácia Hospital

More details

In stock

86,00€ tax excl.

Add to wishlist

More info

Key Features:

  • Temperature
    • Reading Range -20 to +60°C
    • Sensor Type 10K NTC Thermistor (Integral)
    • Resolution 0.1°C
    • Accuraccy: ±1,0°C
  • Humidity
    • Reading Range 0 to 99% RH
    • Sensor Type Capacitive (Integral)
    • Resolution: 1% RH 
    • Accuracy ±3.0% RH (35 até 75%)
  • Other technical data
    • Display: LCD + indicators
    • Reading Types: Actual, Min, Max
    • Indication of the current temperature and humidity
    • DCF radio controlled time and date
    • MIN/MAX values and time of reception
    • Indication of the current dew point
    • Temperature display in ºC/ ºF
    • 12 or 24 hour time mode
    • Time zone option ±12 hours
    • LCD contrast selectable
    • Low battery indicator
    • Data logging function – up to 50000 data records
    • Logging intervals 1, 5, 10, 15, 30 minutes or 1, 2, 3, 6 hours
    • Data sets can be called up either directly on the device or using a PC
    • Display of the data sets that have not yet been read out in %
    • Up to 8 transmitters receivable (temperature and humidity transmitter or only temperature transmitter with external cable sensor)
    • Text display with predefined serial number or individual name assignment for transmitters that have been received
    • Manual learning function for all transmitters or individual transmitters
    • Status display upon loss of transmitter signals
    • Data transfer via USB wireless transceiver
    • Individual alarm limits for all channels can be set with visual and /or acoustic alarm
    • Additional generat of “AlarmEvent” data sets when an alarm is triggered
    • Switching output for alarm output to external hardware
    • Table standing or wall mounting
    • Including easy-to-use Windows software

This device allows you to make detailed recordings of the temperature and humidity and to actively monitor them. Recorded data can be transferred to a computer using a USB transceiver for easy analysis. The supplied software can also be used for managing the logger and can be used purely as windows service to provide datasets to your own software application. The logger is able to use up to eight outdoor transmitters. 

Areas of application:

  • Health:
    • Blood collection
    • Clinics
    • Hospitals
    • Pharmacies
  • Food sector:
    • Bakery
    • Restaurants
    • Hotels
    • Catering 
    • Food industry
    • Supermarkets
    • Pastries
  • Other sectors
    • Museums
    • Libraries

DCF RADIO CONTROLLED TIME RECEPTION

  • After the KlimaLogg Pro has searched for external transmitters for three minutes, the device begins to search for the DCF signal (german radio-controlled clock signal), and the DCF reception indicator flashes. If the time code has been received after 5-10 minutes, the radio-controlled time is displayed and the DCF reception indicator remains on the LCD.
  • In case the clock cannot detect the DCF-signal (for example due to disturbances, transmitting distance, etc.), the time can be set manually. 
  • The clock will then work as a normal quartz clock. (see: Basic settings/Time and calendar). 
  • The radio controlled clock receives the signals at 2:00 and 3:00 o'clock in the morning. 
  • As soon as the clock has received the DCF signal, the manually set time will be overwritten by the DCF time.
  • Note that during reception of the radio-controlled clock signal, no communication with the USB wireless transceiver is possible or may be briefly interrupted. 

Note for Radio Controlled Time DCF:
The base for the radio controlled time is a Caesium Atomic Clock operated by the Physikalisch Technische Bundesanstalt Braunschweig which has a time deviation of less than one second in one million years. The time is coded and transmitted from Mainflingen near Frankfurt via frequency signal DCF-77 (77.5 kHz) and has a transmitting range of approximately 1500 km. Your Logger receives this signal and converts it to show the precise time in summer or wintertime. The quality of the reception depends greatly on the geographic location. In normal cases, there should be no reception problems within a 1,500 km radius around Frankfurt.

Recommended distance to any interfering sources like computer monitors or TV sets is a minimum of 1.5 - 2 metres.

Within ferro-concrete rooms (basements, superstructures), the received signal is naturally weakened. In extreme cases, please place the unit close to a window and/or point its front or back towards the Frankfurt transmitter.

During night-time, the atmospheric disturbances are usually less severe and reception is possible in most cases. A single daily reception is adequate to keep the accuracy deviation below 1 second.

External temperature and humidity wireless sensor

Note: If you select Accredited Calibration Certificate (IPAC) when purchasing this product, click the Product Customization TAB and fill in the second field (TEXT - Required temperature calibration points.) with the respective required points or simply attach a copy of a calibration certificate.
IP Rating

An IP rating, also known as "International Protection" or "Ingress Protection" rating, is a value assigned to a product that determines its susceptibility to ingress from solids and liquids. The first numeric digit relates to the level of protection against solid objects, and the second numeric digit indicates the level of protection against liquid ingress. Click for a table of IP Rating values.

Table of IP rating values

IP65 - No ingress of dust (6); Protection from water ingress: Low pressure jets of water (5).

Reviews

Write a review

TA 140 Temperature and relative humidity wireless datalogger with display Dostmann 5000-0140 30.3039.IT

TA 140 Temperature and relative humidity wireless datalogger with display Dostmann 5000-0140 30.3039.IT

Brand: Dostmann

For the control of temperature and humidity with indication of dew point, max./ min. function, average values, alarm at freely adjustable temperature and humidity values (upper/​lower limit), data logger with a capacity up to 50.000 measured values, recallable via display or PC-USB interface. Connection of up to 8 wireless outdoor transmitters.

Swiss Precison Farmácia Hospital

19 other products in the same category:

Product customization

After saving your customized product, remember to add it to your cart.
Allowed file formats are: GIF, JPG, PNG

Pictures
Text

loader

* required fields