Indoor Air Quality CO2 Monitor Aranet4 TDSPC0H3

Covid-19 can be spread by aerosols that remain in the air for up to 9 minutes. Propoer ventilation can reduce the risk of Covid-19 infection. CO2 concentration can be used as an air quality indicator and can be monitored with sensors such as Aranet 4. 

Aranet 4 warns when the air quality has become unhealthy and you should take care of the airflow in the room.

Aranet4 is an innovative battery-powered stand-alone wireless sensor for monitoring CO2, temperature, relative humidity and atmospheric pressure at home, school, office or another indoor environment. The device is portable, simple to install, easy to operate and lets you know when the monitored levels have become unhealthy.

Control your environment

Connect your smartphone with the Aranet4 device via Bluetooth by using your iOS or Android app to configure the device, view historical data, set alarms and sensor reading frequency.

Key Features:

• Checks for Carbon Dioxide (CO₂) concentrations
• Maintenance free NDIR (non-dispersive infrared) CO₂ sensor
• Indoor Air Quality displayed in ppm with Good (0 to 1000ppm), Average (1000 to 1400ppm), unhealthy (>1400ppm) indication
• User programmable Visible and Audible CO₂ warning alarm
• Long battery life for up to 4 years
• Capacity 7-day historical data and start noticing patterns
• Measurement ranges:
  • CO₂: 0 to 9999ppm
  • Temperature: 0 to 50°C
  • Humidity: 1 to 85%RH
  • Atmospheric pressure: 0,1 to 1,1 atm (101,325 hPa to 1013,25 hPa=mbar)

See available sensors and receivers from Aranet

Aranet Products

No wires! No strings attached!

Aranet4 is super easy and fun to use. You can move it between rooms in your house, take it to hotels during business trips, or keep and eye on the air quality in classrooms, coference rooms, museums, parties and concerts. Bring your Aranet4 with you whwrwever you go!

You can only improve what you can measure!

Take care of the air you breathe with Aranet4 HOME. It is the first step towards healthier environment around you, your loved ones, friends and colleagues.

The monitor shows on the display the current CO₂ content of the room air, the temperature, humidity and the time.

The LED's illumination colour (Green, Wellow and Red) can be used to quickly evaluate and interpret the current CO2 readings. Alternatively, can be used an alarm signal in the event when a certain limit has been exceeded. 

The importance of air quality for humans

The CO₂ concentration in indoor areas is deemed to be an essential indicator of suitable air quality. Carbon dioxide is a gas that is poisonous for humans and, depending on the concentration in the air, affects their performance, their well-being and their ability to concentrate. Even when there is a CO₂ concentration as low as 1,000 ppm, most people feel the air is not good and the above-mentioned disorders occur.

Download smartphone app:

Optimal Locations for CO₂ Transmitters

• Avoid locations where people may breathe directly onto the sensor. Also avoid placing sensors close to intake or exhaust ducts, or near windows and doorways.
• In demand controlled ventilation wall-mounted sensors provide more accurate data on ventilation effectiveness than duct-mounted sensors. Duct-mounted sensors are best suited to single-zone systems and should be installed as close to the occupied space as possible to allow for easy maintenance access.
• When measuring CO₂ for the purposes of personnel safety, transmitters should be installed close to potential leakage points to enable early detection. The geometry, ventilation, and airflow of the monitored area need to be taken into account. The number and location of the CO₂ transmitters should be based on a risk assessment.

See air quality: CO2 emissions (metric tons per capita)

CO2 emissions

See air quality:

Portugal

Air Quality in Portugal

Worldwide

Worldwide Air Quality

World's Air Pollution

World's Air Pollution