Portable photometer for pH, free and total chlorine PoolLab® 1.0 from Water-id

PoolLab® with its 6 buttons is designed for instant access to the parameters installed, which are: pH, Chlorine (free/combined/total), Alkalinity (Acid Capacity), Cyanuric Acid (Stabilizer). Active Oxygen (MPS), Bromine, Chlorine Dioxide, Ozone, Hydrogen Peroxide, Total Hardness and Calcium Hardness.

As PoolLab® uses wireless Bluetooth 4.0 technology, it can easily be connected to free software and app for test result management. Once test results are synchronized, software and app allow dosage recommendations, based on individually entered water treatment chemicals. User can print test result reports, perform index calculation, such as LSI, and much more.

A free cloud server takes care that data on app and software are constantly synchronized, if the user decides to use this feature.

Key Features:

• 11 Pool Parameters
• Bluetooth Equipped
• Powerful App and Software
• Free Cloud Space
• 6 Buttons for direct Access
• IP68 Waterproof
• Fixed but changeable cuvette
• Also suitable for saltwater pools / pools with salt electrolysis

Measurement parameters

• Chlorine
• pH
• Alkalinity
• Cyanuric
• Active Oxygen*
• Bromine**
• Chlorine Dioxide**
• Ozone**
• Hydrogen*
• Hardness (Total, Calcium)*

*requires reagents not included in basic kit
**requires Glycine reagent tablets if chlorine is present
Note: Glycine reagent tablets are not included in the basic kit

Included in the kit

• PoolLab 1.0 Photometer
• Light shield
• 3 x AAA batteries
• Plastic stirring rod
• 20 tablets DPD N° 1 (free chlorine)
• 10 tablets DPD N° 3 (combined/total chlorine)
• 20 tablets Phenol Red (pH)
• 10 tablets Alkalinity-M (Alkalinity/Acid Capacity)
• 10 tablets CYA-Test (Cyanuric Acid/Stabilizer)
• Printed manual

The new PoolLab 1.0 is a triple wavelength (530/570/620nm) photometer for professional water analysis of private pools and spas.

An in-built but changeable cuvette allows quick water sampling by just dipping in the IP68 waterproof PoolLab.