Klima-Monitor wireless thermo-hygrometer inclusive 3 transmitters TFA 30.3054.10

Key Features:

• Temperature
  • Range internal temperature -10 to 60°C (+32 to +140°F)
  • Range external temperature -40 to +60°C (-40 to 140°F)
  • Resolution temperature: 0.1°C/°F
  • Accuracy temperature: ±1°C
• Humidity
  • Range internal humidity: 20 to 99% rh
  • Range external humidity: 10 to 99% rh
  • Resolution humidity: 1% hr
  • Accuracy humidity: ±5% hr
• Other technical data
  • Displays both humidity & temperature and comfort symbol
  • Maximum, minimum memory function
  • Wall or stand mounting
  • % RH audible and visual alarm alerts when humidity exceeds set limit
  • Alarm configuration for receiver and three sensors only
  • Memory of maximum and minimum temperature and humidity inside and of all sensors
  • Simultaneous display of indoor temperature / humidity and sensors 1, 2 and 3. If more sensors were installed, they would be seen alternately with the interior
  • 3 wireless sensors including temperature and humidity with display
  • Data transmission every 60 seconds
  • Maximum field clearance without obstacles: 100 mts
  • Signal frequency 433 Mhz
  • Supports up to 8 additional sensors model 30.3208.02. Total maximum of 9 zones
  • Frost symbol if outside temperature is between -2 and +3°C
  • onfigurable high and low temperature and humidity alarm for indoor and sensors 1, 2 and 3
  • Temperature and humidity calibration function for all sensors
  • Comfort indicator for all sensors

This thermo-hygrometer is ideal for monitoring both temperature and humidity in health sector like: pharmacies, clinics, hospitals, pharmaceutical industry. Other applications like rooms, offices, factories and similar to ensure optimum working conditions are maintained.

The Hygro-Thermometer is housed in an ABS case, measuring 116 x 116 x 24 mm,  that incorporates a useful foldaway stand and a keyhole slot for hanging on a wall.

Note: If you select Accredited Calibration Certificate (IPAC) when purchasing this product, click the Product Customization TAB and fill in the second field (TEXT - Required temperature calibration points.) with the respective required points or simply attach a copy of a calibration certificate.