Pressure gauge Air pressure, Non-corrosive gas Greisinger GMH 3161-01

Key Features:

• Measuring range: -100 to 2500 Pa (-1.00 to 25.00mbar)
• Maximum overload: 100 mbar
• Resolution: 1 Pa (0.01 mbar)
• Selectable display quantities: bar, kPa, PSI, mmHg, mH2O, bar, Pa, kPa, PSI, mmHg, mH2O
• Accuracy:
  • Hysteresis and linearity: ± 0.3% End of scale
  • Temperature influence: Between 0 to 50 ° C: ± 0.4% FS
• Pneumatic connection: 2 metal connection pins with an internal diameter of 4 mm, made of nickel-plated brass, for connecting 6 x 1 mm pressure tubes
• Internal sensor type: Piezo-resistive relative pressure sensor integrated in the device Suitable for non-corrosive and non-ionizing gases and liquids. (Not suitable for water - use an air filter)
• Environmental working conditions: -25 to + 50 ° C, 0 to + 95% Hr (non-condensing)
• Measurement rate:
  • Slow: 4 measurements / second (ConF-Rate = Slow)
• Adjustable re-calibration (zero and scale)
• Low battery indication
• Impact resistant ABS plastic body
• Country of origin: Germany
• Display: 4-line, 4-digit LCDs (12.4 mm and 7 mm high) for measurement values ​​and for memory indication, maximum, hold function, among others, indication with additional function symbols
• Pushbuttons: 6 membrane
• Interface Output: 3.5 mm plug, the serial interface (3.5 mm jack) can be connected to the USB or RS232 interface of a PC via the optional interface adapter (electrically isolated USB 3100, USB 3100 N or GRS 3100 or GRS 3105 (see accessories))
• Power supply: 9V battery, type: IEC 6F22 (included). DC power supply available with connector (suitable power supply: GNG10 / 3000)
• Consumption: ~ 0.6 mA
• Dimensions: 142 x 71 x 26 mm
• Weight: 165 grams
• 1 years warranty

The GMH 3161-01 has been specially designed for pressure measurements, allowing measurements with high precision. The GMH 3161-01 has a quick measurement response. Insert the tube into the device's 4 mm connector and the meter will show quick and accurate measurements.

The GMH 3161-01 incorporates an easy-to-read 12.4 mm high LCD display with low battery indication, where applicable. The equipment measures the pressure between -100 to 2500 Pa (-1.00 to 25.00 mbar) with a resolution of 0.01 mbar and an accuracy of ± 0.3% end of scale. The meter is covered with an impact resistant ABS plastic.