Pressure Transmitter with Stainless Steel Membrane 4 – 20 mA - Senseca EPS2

EPS2

New product

The Senseca EPS2 is a pressure transmitter designed for applications where fast pressure changes must be measured reliably under demanding industrial conditions.

Datasheet

More details

Add to wishlist

More info

SENSECA • EPS2 • PRESSURE • STAINLESS STEEL • 4–20 mA • < 1 ms

Senseca EPS2

Pressure Transmitter with Stainless Steel Membrane
Industrial transmitter for measuring relative pressure in liquids and gases, featuring a stainless steel thin-film measuring cell, response time below 1 ms, 4–20 mA two-wire output and pressure ranges from 0...0.6 to 0...2000 bar.
0...0.6 to 0...2000 bar – wide range of relative pressure options
< 1 ms – fast response for dynamic pressure applications
Stainless Steel Membrane – hermetically welded thin-film measuring cell
4–20 mA / 2-wire – easy integration into industrial control systems
IP65 / IP67 – industrial protection for demanding environments
G 1/4 A + M12x1 – standard configuration for industrial integration

With relative pressure ranges from 0...0.6 to 0...2000 bar, the EPS2 family offers machine builders, system integrators and plant operators a broad choice within a single transmitter family, from lower pressure ranges up to very high-pressure applications.

The combination of a stainless steel diaphragm, thin-film technology, fast analog signal conditioning and 4–20 mA industrial output makes the EPS2 particularly suitable for hydraulics, pneumatics, test technology, process control and other dynamic applications.

Industrial Pressure Measurement up to 2000 bar with < 1 ms Response
The EPS2 combines an exceptionally broad pressure range, a stainless steel measuring cell and an analog signal path designed to react quickly to pressure changes, making it suitable for both steady-state and highly dynamic industrial pressure applications.

Fast Response < 1 ms

Hydraulic, pneumatic and process control applications can involve extremely rapid pressure changes.

The analog signal path, using Mixed-Signal ASIC conditioning, supports response times below 1 ms, making the EPS2 suitable for applications where pressure dynamics need to be captured quickly.

Stainless Steel Thin-Film Pressure Cell

The sensor uses a thin-film pressure measuring bridge applied to a stainless steel diaphragm.

The measuring element uses a polysilicon thin-film bridge on the stainless steel diaphragm, forming the core of the pressure measurement system.

Hermetically Welded Measuring Cell

The stainless steel measuring cell is hermetically welded and vacuum-tight.

This construction is designed for media compatible with stainless steel, providing a robust solution for industrial and process applications.

Wide Pressure Range: 0.6 to 2000 bar

One of the key advantages of the Senseca EPS2 family is its exceptionally broad coverage of relative pressure ranges.

Minimum range: 0...0.6 bar.
Maximum range: 0...2000 bar.

This wide range allows users to select a suitable transmitter from the same product family for applications ranging from lower pressures to very high-pressure hydraulic systems.

Analog Signal Conditioning and Digital Calibration

The signal path remains analog, using Mixed-Signal ASIC conditioning to support very fast response.

Digital calibration contributes to long-term stability and a compact total error, combining dynamic performance with dependable industrial measurement.

4–20 mA Two-Wire Industrial Output

The EPS2 provides a standard 4...20 mA two-wire output.

This interface allows straightforward integration into industrial control, automation and data acquisition systems.

Robust All-Metal Design

The EPS2 features a robust all-metal housing designed for demanding industrial applications.

Construction: stainless steel.
Seal: FKM.

IP65 / IP67 Protection

The IP65 / IP67 ingress protection supports use in demanding industrial environments where a high level of enclosure protection is required.

G 1/4 A Process Connection

The standard mechanical connection is a G 1/4 A male thread.

Connection material: stainless steel 1.4301.

Installation and Sealing

The transmitter is screwed into a socket or T-piece and sealed using the integrated ED sealing ring, simplifying installation in the process.

Electrical Connections

The standard version uses a 4-pin M12x1 circular connector.

Standard: M12x1 circular, 4-pin.
Optional: DIN 43650-A / ISO 4400.

Key Benefits of the Senseca EPS2

Fast Response: response time below 1 ms.
Wide Pressure Range: relative pressure from 0...0.6 to 0...2000 bar.
Stainless Steel Diaphragm: thin-film technology for industrial pressure measurement.
Hermetically Welded Cell: vacuum-tight stainless steel construction.
Industrial Output: 4–20 mA two-wire signal.
Industrial Protection: IP65 / IP67.
Robust Metal Design: stainless steel construction with FKM seal.
Easy Integration: G 1/4 A process connection and M12x1 connector as standard.

Applications

Hydraulics
Pressure measurement in hydraulic systems and applications with rapid pressure changes.
Test Technology
Pressure monitoring in test benches and testing systems.
Pneumatics
Dynamic pressure measurement in pneumatic systems and equipment.
Industrial Robots
Pressure integration into automation and robotic systems.
Mobile Systems
Pressure applications in mobile equipment and systems.
Process Control
Pressure monitoring in industrial processes and automated systems.
HVAC
Integration into technical climate-control and HVAC systems.
Water Technology
Pressure measurement in water systems and installations.
Automotive Technology
Pressure measurement and monitoring in automotive applications.

Technical Specifications

Identification
ManufacturerSenseca
ModelEPS2
TypePressure transmitter
Measurement
Pressure typeRelative pressure
MediaLiquids and gases
Pressure range0...0.6 to 0...2000 bar
Response time< 1 ms
Measuring Cell
TypeStainless steel thin-film pressure cell
Measuring bridgePolysilicon thin-film bridge on stainless steel diaphragm
Cell constructionHermetically welded and vacuum-tight
Signal Processing & Output
Signal conditioningAnalog signal path with Mixed-Signal ASIC
CalibrationDigital
Output signal4...20 mA
Configuration2-wire
Process Connection
ConnectionG 1/4 A male thread
Connection materialStainless steel 1.4301
Installation sealingIntegrated ED sealing ring
Electrical Connection
StandardM12x1 circular connector, 4-pin
OptionalDIN 43650-A / ISO 4400
Construction & Protection
ConstructionAll-metal / stainless steel
SealFKM
Ingress protectionIP65 / IP67

Senseca EPS2 FAQ

What does the Senseca EPS2 measure?
The EPS2 measures relative pressure in liquids and gases, with ranges from 0...0.6 up to 0...2000 bar.
What is the response time?
The analog signal path supports response times below 1 ms.
Which measuring technology does it use?
It uses a polysilicon thin-film measuring bridge on a stainless steel diaphragm.
Is the pressure cell welded?
Yes. The stainless steel diaphragm is hermetically welded and vacuum-tight.
What is the output signal?
The EPS2 provides a 4...20 mA two-wire industrial output.
What is the process connection?
The mechanical connection is a G 1/4 A male thread made from stainless steel 1.4301.
Is an M12 connection available?
Yes. The standard version uses a 4-pin M12x1 circular connector. DIN 43650-A / ISO 4400 is available as an option.
What is the ingress protection rating?
The Senseca EPS2 is rated IP65 / IP67.
Which applications is the EPS2 suitable for?
Typical application areas include hydraulics, test technology, pneumatics, industrial robots, mobile systems, process control, HVAC, water technology and automotive technology.
Senseca EPS2 – Fast, Robust Pressure Measurement up to 2000 bar
Looking for a pressure transmitter for liquids or gases with very fast response and pressure ranges up to 2000 bar? Contact EMI to select the pressure range and configuration best suited to your application.

Request a Quote

Contact Us

Reviews

Write a review

Pressure Transmitter with Stainless Steel Membrane 4 – 20 mA - Senseca EPS2

Pressure Transmitter with Stainless Steel Membrane 4 – 20 mA - Senseca EPS2

The Senseca EPS2 is a pressure transmitter designed for applications where fast pressure changes must be measured reliably under demanding industrial conditions.

Datasheet

1 other product in the same category: