SENSECA • DX Digital • Soil Moisture • VWC • Temperature • Agriculture
Senseca DX 721
Digital Soil Moisture and Temperature Probe
Wide-range digital probe for precise measurement of volumetric water content – VWC and temperature, designed for agriculture, horticulture, greenhouses, substrates and long-term monitoring.
0–60% VWC – nominal soil volumetric water content measurement range
Up to 100% VWC – extended measurement possible with limited accuracy
-40 to +80 °C – integrated temperature measurement
High-Frequency TDT – volumetric water content measurement technology
DX-Sensor-Interface – fully interchangeable digital probe
Low Power Consumption – typically only 0.5 mA for long-term monitoring
The probe is suitable both for fast measurements at changing locations and for long-term monitoring at fixed locations, making it ideal for agriculture, horticulture, greenhouses, research, substrate testing and soil condition monitoring.
Optimised and calibrated for typical agricultural soils, the DX 721 combines fast measurement, low power consumption, high long-term stability and the flexibility of the Senseca DX digital interface.
Volumetric Water Content Measurement – % VWC
Soil moisture is expressed as Volumetric Water Content – VWC. VWC represents the ratio between the volume of water and a defined volume of moist soil, normally expressed as % VWC.
Why Choose the Senseca DX 721?
Moisture + Temperature: two key soil parameters measured with a single probe.
Wide VWC Range: nominal measurement from 0 to 60% VWC, with readings possible up to 100% VWC at limited accuracy.
TDT Technology: high-frequency measurement principle for volumetric moisture determination.
Digital Probe: calibration and probe data stored internally for interchangeable use.
Plug & Measure: connect to a compatible Senseca meter and start measuring.
Low Power Consumption: typically only around 0.5 mA.
Flexible Use: suitable for both mobile measurements and fixed long-term monitoring.
Multiparameter Integration: can be combined with other DX digital probes using PRO D05 instruments.
High-Frequency TDT Measurement Technology
The DX 721 uses a high-frequency TDT measurement principle to determine the volumetric water content present in the soil.
The active measuring area is approximately 110 × 30 mm, allowing the probe to evaluate moisture conditions in the contact area between the sensor and the soil or substrate.
0 to 60% VWC Measurement Range
The nominal soil moisture measurement range is 0 to 60% VWC, providing broad coverage for agricultural and horticultural applications.
Note: readings are possible up to 100% VWC, but accuracy is limited in this extended range.
Accuracy Optimised for Agricultural Soils
The Senseca DX 721 is optimised and calibrated for use in typical agricultural soils. Actual accuracy depends on soil characteristics and the application.
Standard Calibration: accuracy of up to ±3% VWC can be achieved in mineral soils with medium salinity between 0 and 50% VWC.
Soil-Specific Calibration: accuracy of up to ±1% VWC can be achieved, depending on the application and calibration.
Integrated Temperature Measurement
In addition to soil moisture, the DX 721 incorporates an integrated temperature sensor, allowing two important soil parameters to be monitored simultaneously.
Range: -40 to +80 °C
Resolution: 0.1 °C
Accuracy: typically ±0.2 °C; maximum ±0.4 °C over the full range
Measurement in Soils, Substrates and Other Materials
Although optimised for agricultural soils, the DX 721 can also be used to evaluate other materials and growing substrates.
• Mineral wool.
• Coconut fibre.
• Wood fibre.
• Paper and similar materials.
Important: when used with materials other than the soils for which the standard calibration is intended, readings should be interpreted or calibrated specifically for the material.
Fully Interchangeable Digital Probe
The DX 721 uses the digital DX-Sensor-Interface. The probe is supplied fully calibrated, with the relevant adjustment data associated with the sensor itself.
This allows probes to be replaced or exchanged easily: plug in and measure, providing additional flexibility for field, laboratory and agricultural monitoring applications.
Compatible with Senseca PRO D01 and PRO D05
The digital connection through a 4-pole M12 connector allows the DX 721 to be used with Senseca instruments compatible with DX digital probes.
Senseca PRO D01: 1-channel handheld meter for digital probes.
Senseca PRO D05.2: 2-channel handheld data logger for up to two DX digital probes.
Senseca PRO D05.3: 3-channel handheld data logger for up to three DX digital probes.
Multiparameter Measurement with PRO D05
With the multichannel PRO D05.2 and PRO D05.3, the DX 721 can be combined with other DX digital probes, creating a multiparameter measurement solution in one handheld instrument.
This makes it possible to combine soil moisture and temperature with other quantities available within the Senseca DX sensor ecosystem, depending on the requirements of the application.
Designed for Long-Term Monitoring
The DX 721 is designed not only for spot measurements but also for long-term monitoring at fixed locations.
Typical power consumption of only 0.5 mA, together with the digital interface and field-oriented construction, supports continuous monitoring applications in agriculture and horticulture.
Recommended Applications
Agriculture
Monitoring soil water content and temperature in agricultural soils.
Horticulture
Monitoring crop conditions and supporting irrigation management.
Greenhouses
VWC and temperature measurement in soils and growing substrates.
Irrigation
Support for evaluating water availability in the soil and optimising irrigation strategies.
Agricultural Research
Testing, condition comparison and documentation of moisture and temperature measurements.
Growing Substrates
Measurements in coconut fibre, mineral wool and other materials, with suitable interpretation or material-specific calibration.
Long-Term Monitoring
Fixed installation for continuous monitoring of soil conditions.
Technical Specifications
| Identification |
| Manufacturer | Senseca |
| Model | DX 721 |
| Type | Digital soil moisture and temperature probe |
| Soil Moisture |
| Measurement principle | High-frequency TDT |
| Measurement quantity | Volumetric Water Content – % VWC |
| Measurement range | 0 to 60% VWC |
| Maximum possible range | Up to 100% VWC with limited accuracy |
| Resolution | 0.1% VWC |
| Typical accuracy | ±3% VWC, depending on soil conditions |
| Measuring area | 110 × 30 mm |
| Temperature |
| Temperature sensor | IC sensor |
| Measurement range | -40 to +80 °C |
| Resolution | 0.1 °C |
| Typical accuracy | ±0.2 °C |
| Maximum accuracy over full range | ±0.4 °C |
| Interface & Power Supply |
| Interface | DX-Sensor-Interface |
| Connection | 4-pole M12 connector via cable |
| Power consumption | 0.5 mA typical |
| Operating Conditions |
| Temperature | -40 to +80 °C |
| Relative humidity | 0 to 100 %RH |
| Construction |
| Dimensions | 182 × 30 × 12 mm |
| Measuring area thickness | Approx. 1.6 mm |
| Soil-contact material | FR4 epoxy |
| Handle material | Luran / stainless steel screws |
| Cable material | PVC |
Available Models and Article Numbers
| Model | Cable | Art. No. |
| DX 721-L02-P | 2 m PVC | 487434 |
| DX 721-L05-P | 5 m PVC | 487647 |
Compatible Senseca Instruments
| Instrument | Configuration | Art. No. |
| PRO D01 | 1-channel handheld meter | 486134 |
| PRO D05.2 | 2-channel handheld data logger | 486136 |
| PRO D05.3 | 3-channel handheld data logger | 486137 |
Compliance
CE: applicable declaration of conformity for the product family.
RoHS: compliance with applicable restrictions on hazardous substances.
REACH: compliance with applicable requirements for substances and SVHC information.
EMC: applicable electromagnetic compatibility requirements.
Senseca DX 721 FAQ
What does the Senseca DX 721 measure? It measures soil volumetric water content, expressed as % VWC, together with temperature.
What is the soil moisture measurement range? The nominal range is 0 to 60% VWC. Readings are possible up to 100% VWC, but with limited accuracy.
What is the VWC measurement accuracy? Typical specified accuracy is ±3% VWC, depending on soil conditions. Under suitable conditions and with soil-specific calibration, accuracy of up to ±1% VWC can be achieved.
Does the DX 721 also measure temperature? Yes. The probe measures temperature from -40 to +80 °C with 0.1 °C resolution.
Can it be used for continuous monitoring? Yes. The DX 721 is designed for both mobile measurements and long-term monitoring at fixed locations.
Can the probe be used in coconut fibre or mineral wool? Yes, but readings should be interpreted or calibrated specifically for the material being measured.
Which instrument is required to use the DX 721? The probe can be used with instruments compatible with the Senseca DX digital interface, including PRO D01, PRO D05.2 and PRO D05.3.
Can several DX 721 probes be used at the same time? Yes. The PRO D05.2 supports up to two digital probes, while the PRO D05.3 supports up to three, depending on the configuration.
Which cable lengths are available? The standard DX 721-L02-P and DX 721-L05-P versions are supplied with 2 m and 5 m PVC cables respectively.
Senseca DX 721 – Soil Moisture and Temperature in One Digital Probe
Need to monitor volumetric soil moisture and temperature in agriculture, horticulture, greenhouses or research? EMI can help you select the appropriate DX 721 version, cable length and compatible Senseca instrument for your application.
Request a Quote
Request Information by Email