LTE gateway for sending SMS messages from HWg devices SMS-GW3 LTE E

1) Device-to-GW
Customers with HWg monitoring devices are using one SMS-GW for alerting. Several HWg devices (LAN Thermometer / Energy monitoring) can connect to a single SMS-GW to send alarm alerts (SMS/voice calls) to different phone numbers. No extra software is needed, and it works over the local network using Box-2-Box (Peer-to-Peer) communication.

2) Portal-to-GW
Any installation of SensDesk portal can use the SMS-GW for alerting. The gateway have to be accessible from the portal (either through a VPN or a public IP address).

3) 3th party SW to GW
For third-party (non HWg products) users, the SMS-GW can be usefule gateway for alerting through several Open API.

• HTTP GET
• netGSM (SOAP documented protocol)
• General SNMP (Write)

Features:

• Connectivity: Ethernet (10/100 Mbit/s), LTE
• LTE antenna: External 3m cable, SMA
• Internal memory for outgoing SMS queue: 100 messages
• SMS/Calls GW for all HWg devices (RME)
• SMS/Calls GW for any SNMP software
• SMS/Calls GW for any NAGIOS (plugin by NETWAYS)
• Open API: SNMP, XML, netGSM (http, SOAP)
• Supports the "SMS + Ring" function for combined SMS and ring notifications.
• Dimensions: 76 x 93 x 28 mm
• Fixation: wall-mountable, fits on a DIN rail

Applications and usage:

• Single SMS gateway for the entire network with an easy-to-use web-based configuration.
• Send text messages without the need for any additional software.
• Configure the recipient's phone number directly in the sending device.

Applications and usage:

Single SMS gateway for the entire network with an easy-to-use web-based configuration.
Send text messages without the need for any additional software.
Configure the recipient's phone number directly in the sending device.

Device-to-GW: Sending SMS alerts from HWg devices over LAN
Customers with HWg monitoring devices are using one SMS-GW for alerting. No additional software or service is needed, just monitonig device + SMS GW. It's working over the local network using Box-2-Box (Peer-to-Peer) communication

• Poseidon2 4002 & SMS-GW are on the same LAN
• Telephone number of Mr. Blue is defined in the web gui of Poseidon2 4002 (same as SMS-GW IP address).
• Poseidon2 4002 sends an alarm message about a sensor value to Mr. Blue's phone number via SMS-GW over the LAN.
• Alerting use the Device-2-GW mode, no software or portal service is needed. It's part of RME (Remote Monitoring Ecosystem)

• SMS-GW3 LTE contains a SIM card and sends cell message alerts (Ring + SMS) on behalf of all devices in the network.
• One SMS-GW device can be used by several device on the LAN, each device can alert to different recipients (Mt. Green or Blue).
• Message recipients' phone numbers (Mr. Blue, Mr. Green, ...) are configured in the sending device.
• Together with the text message, it is also possible to Ring (Voice call) the recipient and let the phone ring for a short time (configured in the sending device).

Portal-to-GW: Sending SMS alerts from the Portal

Any installation of SensDesk portal (SaaS / On-premise) can use the SMS-GW for alerting. The gateway have to be accessible from the portal (either through a VPN or a public IP address).

• Any Portal (based on SensDesk Technology) can use the SMS-GW device for sending alerts (Ring + SMS).
• The SMS-GW have to be accessible from the Portal (same LAN / Public IP / VPN)
• One SMS-GW (SIM card / phone number) can be alerting to several recipients (telephone numbers) from several Teams (company accounts) in the Portal.
• All HWg devices are connected to the Portal, based on conditions defined on the Portal are send alert via the SMS-GW.
• Alerting via Portal is more reliable due possibility of Device Invalid Alert (device is disconnected from the Portal cca 60 min)
• Recipients' phone numbers (Mr. Purple, Mr. Green) are configured in the Portal.